Parts

• 50 feet (15.2 meters) length • 5mm diameter brake cable housing

Narrow/Wide tooth design for chain retention on 1x systems - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy

- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

Small parts used to install hydraulic hose for Magura disc brakes.

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.

- Replacement pins for tool shed chain tool. - Bag of 10

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- M8 Top Plate Bolt

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

KS Dropper Post Service Parts

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

- Routes cables underneath the bottom bracket - Will not rust or corrode

- M8 Top Plate Nut

- w/Nut - 1-3/4-inch

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.

- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack

- With plastic washers - Shell: 8mm Allen head axle bolt

Small parts for TRP hydraulic disc brake systems.

- Aluminum w/lock nut and mount - Slotted mount design

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

Fittings for Jagwire hydraulic hose. - Compression Nut to install Jagwire hydraulic hose with Shimano brakes - M8-0.75 Thread, 18.8mm Length

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

Volume Spacer tuning kits for FOX suspension fork service and repairs.

Standard replacement star nuts for threadless steerers.

- For MTB levers - 7mm x 1mm - Aluminum construction

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- Steel cable noodle with alloy end caps - Includes plastic liner