Other
$10.00
- Prevents chain derailment when shifting to inner ring
- Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
$22.00
- Includes stainless bolts
- Fits 160mm front and 140mm rear rotors
$28.00
- Includes stainless steel bolts
- 40mm fits 200mm Front and 180mm Rear Rotors
$40.00
- Plastic guide and clamp with TPE elastomer for quiet, smooth chain retention
- Zip-Ties quickly onto a variety of chainstays
- Split design fits over the gear cable and chain, No disassembly required
- Pivoting chain tube follows the chainline on 2 or 3 chainring setups
$2.25
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$15.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Durable steel construction
- Allows the installation of a straight steerer fork without changing out the headset lower
$22.00
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$3.00
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Star Ratchet Spring
$16.00
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 1526 Bearing for Rear Driveside Spline 1200, 2nd Generation Spline1501 and Dicut Disc Wheels
$18.00
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6805 Bearing
$23.00
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 18307 Bearing
$8.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$9.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$9.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$10.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$24.00
Air spring seal kits for Fox suspension repair and rebuild.
$26.00
Rebuild seal kits for Fox rear suspension service and repair.
- Includes parts needed for rebuild
$4.50
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks.
- M12 bolt
$8.00
ISIS cranks have been around a long time, and they're still a great design. If you've got one, keep it in top working condition with these quality crank bolts from FSA.
- ISIS-compatible
- M12
$12.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$15.00
This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks
- Designed to fit alloy FSA cranks only
- Includes M17 bolt, M27 self-extracting cap, and washers
$21.00
FSA (Full Speed Ahead) Chainring Bolts
$11.00
-Seatpost clamp for Defy/Avail Aluxx models (2015-2016)
$12.75
- Dust-proof and waterproof rubber seal cover
- Protect the power source connection on the frame when the e-bike is parked outside or you carry it without the EnergyPak
$12.75
- Dust-proof and waterproof rubber seal cover.
- Protect the power source connection on the frame when the e-bike is parked outside or when you carry it without the EnergyPak.
Page 1 of 6
Next page