Parts

• 50 feet (15.2 meters) length • 5mm diameter brake cable housing

Narrow/Wide tooth design for chain retention on 1x systems - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy

- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

Spacers to insure proper chainline and chainring spacing on your bike. • 0.6mm thick • Sold in a bag of 20 spacers

Small parts used to install hydraulic hose for Magura disc brakes.

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

Origin-8's 1-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses. You get a bag of 10 spacers.

- M8 Top Plate Bolt

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

KS Dropper Post Service Parts

Origin-8's 1 1/8-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses and lots of cool colors to add style to your ride. You get a bag of 10 spacers.

Origin-8's Alloy Braze-on Inserts convert hydraulic pass-throughs to cable stops so you can run full length housing. Designed for frames with pass through braze ons and sold in a bag of 10.

- Routes cables underneath the bottom bracket - Will not rust or corrode

- M8 Top Plate Nut

- w/Nut - 1-3/4-inch

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.

- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack

- With plastic washers - Shell: 8mm Allen head axle bolt

- Aluminum w/lock nut and mount - Slotted mount design

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

Lizard Skins grip donuts feature a neoprene material printed with the Lizard Skins logo and add comfort to the flange side of the grip.

- AL6061 alloy construction - Non-keyed design - Jar of 10 spacers

- For MTB levers - 7mm x 1mm - Aluminum construction

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.